Giftlete Storefront

RUCK. RUN. LIFT. TRAIN. BE STRONGER WITH ROUGH RUNNER® We built the Rough Runner® to be lightweight and good for high mileage, on a modern running platform. You’ll recognize this in a comfortable fit, but these are not just normal running shoes. In Special Forces, we would run our asses off on pavement and on tank trails and then get to the physical training — push, pull, carry, drag and roll around in dirt fields with weight and slick. Simply running in a straight line is not enough for our way of life and we needed more versatility to do all the things. This is the inspiration for the Rough Runner®. Features GRADIENT DENSITY™ EVA MIDSOLE There's no other midsole like it. Custom formulated EVA provides cushioning and rebound with better long-term durability than any other running shoe on the market. No marshmallow here. Gradient Density™ means the EVA has more bounce under the balls of your foot and gradually becomes more stable towards your heel. You can't see it, but you'll feel the difference from heel strike to toe off. VERSATILE ROAD-TO-TRAIL OUTSOLE Pound the pavement or go off-road. Two different rubber compounds form a single, seamless rubber outsole that performs in even the most demanding terrain. The forefoot rubber is formulated for increased grip and the heel is dense, durable and won't wear down after miles of running or ruck running. LIGHTWEIGHT MESH + REINFORCED TPU UPPER Seamless, one-piece 100D polyester mesh provides breathability and flexibility without cramping your toes. At 330 g/sqm it's the ideal balance of weight and toughness. High-wear areas are reinforced with a protective TPU film. We targeted the toe area for abrasion resistance and the midfoot to heel area for additional lockdown support. 10MM OFFSET A 10mm heel-to-toe drop allows for the ideal balance between a running stride and a rucking gait. You have enough of a lift to reduce the strain on your achilles and support your heel strike while still controlling your cadence. 3D MOLDED HEEL LOCK Comfortable PU foam bolsters lock in the heel to prevent slippage and excessive movement around the ankle. This allows you to secure your heel into the shoe without relying on lace-locking or lacing too tightly. ANATOMICALLY MOLDED TPU HEEL COUNTER Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. REFLECTIVE PULL TAB Highly reflective pull tab on the back heel keeps you visible on the road or trail. Stay safe out there when choosing the harder path. LACE-LOCK EYELETS Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. CUSTOM HIGH DENSITY INSERT Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Specs + Materials Upper materials: 100D polyester mesh + TPU film reinforcement Gradient Density™ EVA Midsole Dual Compound Rubber Outsole Custom High Density Insert included 10mm heel-to-toe drop Weight (size 9): 10.5 ounces Dimensions (size 9): 12"x4.5"x4.5" Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

3X Support™ = 3X Stability Lift heavier. Sprint faster. Ruck harder. And look cool doing it. The new standard in functional fitness footwear with 3X Support™ and 3X Stability for all three (3) of your arches, making them the best workout shoes for men and women ever created. Features Engineered Warp Knit & CORDURA® Ballistic Nylon Upper The forefoot is constructed using an engineered warp knit technology which provides a seamless one piece vamp and toe cap while offering areas of reinforced strength and other areas of breathability and flexibility. The lace area, midfoot and heel is made from two panels of 1800D CORDURA® Ballistic Nylon — offering the toughest Special Forces grade abrasion resistance against the stresses of rope climbs. This 1800D CORDURA® also provides superior midfoot and heel support during dynamic movements. Anatomically Molded TPU Heel Counter Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. Lace-Lock Eyelets Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance doing the work at the gym or anywhere you're training, your feet will swell. This extra space, along with the breathable and flexible knit, reduces the friction that can occur if your feet rub against the insides of your shoe. Custom High Density Insert Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Versatile Heel-to-Toe Drop Classic powerlifting shoes have a 20mm+ heel-to-toe drop (and meant for nothing else), running shoes are all over the place (according to the latest fad), other functional fitness trainers and some weight training shoes are 4mm (and you can't wait to take them off after the WOD), Chuck T's are zero drop (and painful over all the miles). The 8mm heel-to-toe drop in the Ballistic Trainers™ creates the best biomechanical advantage when lifting heavy loads (squat, clean, snatch) or moving more than 400 meters (running or rucking). Gradient Density™ EVA Midsole Two (2) different types of EVA fused together in a smooth gradient from forefoot to heel. High rebound, high flexibility EVA in the forefoot provides cushion and support for explosive movement. Firm, stable EVA in the heel provides a stable platform to keep you grounded when lifting or squatting. Triple Compound Rubber Outsole Three (3) different rubber compounds form a single, seamless rubber outsole. Forefoot rubber is formulated for increased grip while the heel area is dense and won't wear down after miles of running or rucking. The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance — ideal for rope climbs. Specs + Materials Upper materials: Engineered Knit, 1800D CORDURA® Gradient Density™ EVA Midsole Triple Compound Rubber Outsole Custom High Density Insert included 8mm heel-to-toe drop Weight (size 9): 0.675 lbs (10.8 ounces) Dimensions (size 9): 12"L x 4.25"W x 4.5”H Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

3X Support™ = 3X Stability Lift heavier. Sprint faster. Ruck harder. And look cool doing it. The new standard in functional fitness footwear with 3X Support™ and 3X Stability for all three (3) of your arches, making them the best workout shoes for men and women ever created. Features Engineered Warp Knit & CORDURA® Ballistic Nylon Upper The forefoot is constructed using an engineered warp knit technology which provides a seamless one piece vamp and toe cap while offering areas of reinforced strength and other areas of breathability and flexibility. The lace area, midfoot and heel is made from two panels of 1800D CORDURA® Ballistic Nylon — offering the toughest Special Forces grade abrasion resistance against the stresses of rope climbs. This 1800D CORDURA® also provides superior midfoot and heel support during dynamic movements. Anatomically Molded TPU Heel Counter Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. Lace-Lock Eyelets Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance doing the work at the gym or anywhere you're training, your feet will swell. This extra space, along with the breathable and flexible knit, reduces the friction that can occur if your feet rub against the insides of your shoe. Custom High Density Insert Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Versatile Heel-to-Toe Drop Classic powerlifting shoes have a 20mm+ heel-to-toe drop (and meant for nothing else), running shoes are all over the place (according to the latest fad), other functional fitness trainers and some weight training shoes are 4mm (and you can't wait to take them off after the WOD), Chuck T's are zero drop (and painful over all the miles). The 8mm heel-to-toe drop in the Ballistic Trainers™ creates the best biomechanical advantage when lifting heavy loads (squat, clean, snatch) or moving more than 400 meters (running or rucking). Gradient Density™ EVA Midsole Two (2) different types of EVA fused together in a smooth gradient from forefoot to heel. High rebound, high flexibility EVA in the forefoot provides cushion and support for explosive movement. Firm, stable EVA in the heel provides a stable platform to keep you grounded when lifting or squatting. Triple Compound Rubber Outsole Three (3) different rubber compounds form a single, seamless rubber outsole. Forefoot rubber is formulated for increased grip while the heel area is dense and won't wear down after miles of running or rucking. The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance — ideal for rope climbs. Specs + Materials Upper materials: Engineered Knit, 1800D CORDURA® Gradient Density™ EVA Midsole Triple Compound Rubber Outsole Custom High Density Insert included 8mm heel-to-toe drop Weight (size W11): 0.675 lbs (10.8 ounces) Dimensions (size W11): 12"L x 4.25"W x 4.5”H Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

3X Support™ = 3X Stability Lift heavier. Sprint faster. Ruck harder. And look cool doing it. The new standard in functional fitness footwear with 3X Support™ and 3X Stability for all three (3) of your arches, making them the best workout shoes for men and women ever created. Features Engineered Warp Knit & CORDURA® Ballistic Nylon Upper The forefoot is constructed using an engineered warp knit technology which provides a seamless one piece vamp and toe cap while offering areas of reinforced strength and other areas of breathability and flexibility. The lace area, midfoot and heel is made from two panels of 1800D CORDURA® Ballistic Nylon — offering the toughest Special Forces grade abrasion resistance against the stresses of rope climbs. This 1800D CORDURA® also provides superior midfoot and heel support during dynamic movements. Anatomically Molded TPU Heel Counter Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. Lace-Lock Eyelets Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance doing the work at the gym or anywhere you're training, your feet will swell. This extra space, along with the breathable and flexible knit, reduces the friction that can occur if your feet rub against the insides of your shoe. Custom High Density Insert Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Versatile Heel-to-Toe Drop Classic powerlifting shoes have a 20mm+ heel-to-toe drop (and meant for nothing else), running shoes are all over the place (according to the latest fad), other functional fitness trainers and some weight training shoes are 4mm (and you can't wait to take them off after the WOD), Chuck T's are zero drop (and painful over all the miles). The 8mm heel-to-toe drop in the Ballistic Trainers™ creates the best biomechanical advantage when lifting heavy loads (squat, clean, snatch) or moving more than 400 meters (running or rucking). Gradient Density™ EVA Midsole Two (2) different types of EVA fused together in a smooth gradient from forefoot to heel. High rebound, high flexibility EVA in the forefoot provides cushion and support for explosive movement. Firm, stable EVA in the heel provides a stable platform to keep you grounded when lifting or squatting. Triple Compound Rubber Outsole Three (3) different rubber compounds form a single, seamless rubber outsole. Forefoot rubber is formulated for increased grip while the heel area is dense and won't wear down after miles of running or rucking. The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance — ideal for rope climbs. Specs + Materials Upper materials: Engineered Knit, 1800D CORDURA® Gradient Density™ EVA Midsole Triple Compound Rubber Outsole Custom High Density Insert included 8mm heel-to-toe drop Weight (size 9): 0.675 lbs (10.8 ounces) Dimensions (size 9): 12"L x 4.25"W x 4.5”H Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

3X Support™ = 3X Stability Lift heavier. Sprint faster. Ruck harder. And look cool doing it. The new standard in functional fitness footwear with 3X Support™ and 3X Stability for all three (3) of your arches, making them the best workout shoes for men and women ever created. Features Engineered Warp Knit & CORDURA® Ballistic Nylon Upper The forefoot is constructed using an engineered warp knit technology which provides a seamless one piece vamp and toe cap while offering areas of reinforced strength and other areas of breathability and flexibility. The lace area, midfoot and heel is made from two panels of 1800D CORDURA® Ballistic Nylon — offering the toughest Special Forces grade abrasion resistance against the stresses of rope climbs. This 1800D CORDURA® also provides superior midfoot and heel support during dynamic movements. Anatomically Molded TPU Heel Counter Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. Lace-Lock Eyelets Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance doing the work at the gym or anywhere you're training, your feet will swell. This extra space, along with the breathable and flexible knit, reduces the friction that can occur if your feet rub against the insides of your shoe. Custom High Density Insert Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Versatile Heel-to-Toe Drop Classic powerlifting shoes have a 20mm+ heel-to-toe drop (and meant for nothing else), running shoes are all over the place (according to the latest fad), other functional fitness trainers and some weight training shoes are 4mm (and you can't wait to take them off after the WOD), Chuck T's are zero drop (and painful over all the miles). The 8mm heel-to-toe drop in the Ballistic Trainers™ creates the best biomechanical advantage when lifting heavy loads (squat, clean, snatch) or moving more than 400 meters (running or rucking). Gradient Density™ EVA Midsole Two (2) different types of EVA fused together in a smooth gradient from forefoot to heel. High rebound, high flexibility EVA in the forefoot provides cushion and support for explosive movement. Firm, stable EVA in the heel provides a stable platform to keep you grounded when lifting or squatting. Triple Compound Rubber Outsole Three (3) different rubber compounds form a single, seamless rubber outsole. Forefoot rubber is formulated for increased grip while the heel area is dense and won't wear down after miles of running or rucking. The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance — ideal for rope climbs. Specs + Materials Upper materials: Engineered Knit, 1800D CORDURA® Gradient Density™ EVA Midsole Triple Compound Rubber Outsole Custom High Density Insert included 8mm heel-to-toe drop Weight (size W11): 0.675 lbs (10.8 ounces) Dimensions (size W11): 12"L x 4.25"W x 4.5”H Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

3X Support™ = 3X Stability Lift heavier. Sprint faster. Ruck harder. And look cool doing it. The new standard in functional fitness footwear with 3X Support™ and 3X Stability for all three (3) of your arches, making them the best workout shoes for men and women ever created. Features Engineered Warp Knit & CORDURA® Ballistic Nylon Upper The forefoot is constructed using an engineered warp knit technology which provides a seamless one piece vamp and toe cap while offering areas of reinforced strength and other areas of breathability and flexibility. The lace area, midfoot and heel is made from two panels of 1800D CORDURA® Ballistic Nylon — offering the toughest Special Forces grade abrasion resistance against the stresses of rope climbs. This 1800D CORDURA® also provides superior midfoot and heel support during dynamic movements. Anatomically Molded TPU Heel Counter Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. Lace-Lock Eyelets Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance doing the work at the gym or anywhere you're training, your feet will swell. This extra space, along with the breathable and flexible knit, reduces the friction that can occur if your feet rub against the insides of your shoe. Custom High Density Insert Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Versatile Heel-to-Toe Drop Classic powerlifting shoes have a 20mm+ heel-to-toe drop (and meant for nothing else), running shoes are all over the place (according to the latest fad), other functional fitness trainers and some weight training shoes are 4mm (and you can't wait to take them off after the WOD), Chuck T's are zero drop (and painful over all the miles). The 8mm heel-to-toe drop in the Ballistic Trainers™ creates the best biomechanical advantage when lifting heavy loads (squat, clean, snatch) or moving more than 400 meters (running or rucking). Gradient Density™ EVA Midsole Two (2) different types of EVA fused together in a smooth gradient from forefoot to heel. High rebound, high flexibility EVA in the forefoot provides cushion and support for explosive movement. Firm, stable EVA in the heel provides a stable platform to keep you grounded when lifting or squatting. Triple Compound Rubber Outsole Three (3) different rubber compounds form a single, seamless rubber outsole. Forefoot rubber is formulated for increased grip while the heel area is dense and won't wear down after miles of running or rucking. The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance — ideal for rope climbs. Specs + Materials Upper materials: Engineered Knit, 1800D CORDURA® Gradient Density™ EVA Midsole Triple Compound Rubber Outsole Custom High Density Insert included 8mm heel-to-toe drop Weight (size W11): 0.675 lbs (10.8 ounces) Dimensions (size W11): 12"L x 4.25"W x 4.5”H Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

3X Support™ = 3X Stability Lift heavier. Sprint faster. Ruck harder. And look cool doing it. The new standard in functional fitness footwear with 3X Support™ and 3X Stability for all three (3) of your arches, making them the best workout shoes for men and women ever created. Features Engineered Warp Knit & CORDURA® Ballistic Nylon Upper The forefoot is constructed using an engineered warp knit technology which provides a seamless one piece vamp and toe cap while offering areas of reinforced strength and other areas of breathability and flexibility. The lace area, midfoot and heel is made from two panels of 1800D CORDURA® Ballistic Nylon — offering the toughest Special Forces grade abrasion resistance against the stresses of rope climbs. This 1800D CORDURA® also provides superior midfoot and heel support during dynamic movements. Anatomically Molded TPU Heel Counter Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. Lace-Lock Eyelets Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance doing the work at the gym or anywhere you're training, your feet will swell. This extra space, along with the breathable and flexible knit, reduces the friction that can occur if your feet rub against the insides of your shoe. Custom High Density Insert Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Versatile Heel-to-Toe Drop Classic powerlifting shoes have a 20mm+ heel-to-toe drop (and meant for nothing else), running shoes are all over the place (according to the latest fad), other functional fitness trainers and some weight training shoes are 4mm (and you can't wait to take them off after the WOD), Chuck T's are zero drop (and painful over all the miles). The 8mm heel-to-toe drop in the Ballistic Trainers™ creates the best biomechanical advantage when lifting heavy loads (squat, clean, snatch) or moving more than 400 meters (running or rucking). Gradient Density™ EVA Midsole Two (2) different types of EVA fused together in a smooth gradient from forefoot to heel. High rebound, high flexibility EVA in the forefoot provides cushion and support for explosive movement. Firm, stable EVA in the heel provides a stable platform to keep you grounded when lifting or squatting. Triple Compound Rubber Outsole Three (3) different rubber compounds form a single, seamless rubber outsole. Forefoot rubber is formulated for increased grip while the heel area is dense and won't wear down after miles of running or rucking. The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance — ideal for rope climbs. Specs + Materials Upper materials: Engineered Knit, 1800D CORDURA® Gradient Density™ EVA Midsole Triple Compound Rubber Outsole Custom High Density Insert included 8mm heel-to-toe drop Weight (size 9): 0.675 lbs (10.8 ounces) Dimensions (size 9): 12"L x 4.25"W x 4.5”H Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

3X Support™ = 3X Stability Lift heavier. Sprint faster. Ruck harder. And look cool doing it. The new standard in functional fitness footwear with 3X Support™ and 3X Stability for all three (3) of your arches, making them the best workout shoes for men and women ever created. Features Engineered Warp Knit & CORDURA® Ballistic Nylon Upper The forefoot is constructed using an engineered warp knit technology which provides a seamless one piece vamp and toe cap while offering areas of reinforced strength and other areas of breathability and flexibility. The lace area, midfoot and heel is made from two panels of 1800D CORDURA® Ballistic Nylon — offering the toughest Special Forces grade abrasion resistance against the stresses of rope climbs. This 1800D CORDURA® also provides superior midfoot and heel support during dynamic movements. Anatomically Molded TPU Heel Counter Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. Lace-Lock Eyelets Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance doing the work at the gym or anywhere you're training, your feet will swell. This extra space, along with the breathable and flexible knit, reduces the friction that can occur if your feet rub against the insides of your shoe. Custom High Density Insert Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Versatile Heel-to-Toe Drop Classic powerlifting shoes have a 20mm+ heel-to-toe drop (and meant for nothing else), running shoes are all over the place (according to the latest fad), other functional fitness trainers and some weight training shoes are 4mm (and you can't wait to take them off after the WOD), Chuck T's are zero drop (and painful over all the miles). The 8mm heel-to-toe drop in the Ballistic Trainers™ creates the best biomechanical advantage when lifting heavy loads (squat, clean, snatch) or moving more than 400 meters (running or rucking). Gradient Density™ EVA Midsole Two (2) different types of EVA fused together in a smooth gradient from forefoot to heel. High rebound, high flexibility EVA in the forefoot provides cushion and support for explosive movement. Firm, stable EVA in the heel provides a stable platform to keep you grounded when lifting or squatting. Triple Compound Rubber Outsole Three (3) different rubber compounds form a single, seamless rubber outsole. Forefoot rubber is formulated for increased grip while the heel area is dense and won't wear down after miles of running or rucking. The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance — ideal for rope climbs. Specs + Materials Upper materials: Engineered Knit, 1800D CORDURA® Gradient Density™ EVA Midsole Triple Compound Rubber Outsole Custom High Density Insert included 8mm heel-to-toe drop Weight (size 9): 0.675 lbs (10.8 ounces) Dimensions (size 9): 12"L x 4.25"W x 4.5”H Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

GORUCK X CARRYOLOGY BERSERKER VIKING MACV TRAVELER BOOTS The GORUCK MACV boots are designed for serious adventure, training, and events. For the GRXC3, we refined them for modern travel and exploration. We eliminated drainage holes to prevent cold, wet feet in urban environments. A waterproof synthetic gusset on the tongue enhances water resistance, while the water-resistant leather construction keeps feet dry in deeper puddles. We updated the boot’s aesthetic to a classic workwear look, adding a toe cap and heel counter, and streamlined the design to minimize stitching and potential water entry. A leather finger pull loop on the back stay makes donning the boots quick and easy. The boots feature a subtle custom label in dark charcoal on black and the same blue GRXC3 500D CORDURA Vegvísir footbed liner. After testing in diverse climates and terrains, we believe these are the ideal travel and adventure boots. NOTE: No order cancellations - all orders can be returned within 30 days of delivery if in new condition.No additional discounts apply, including GovX. Can't find your size? Check out the GORUCK MACV-1 Traveler with all the same features! Features All-Terrain Outsole Dual compound rubber outsole delivers versatile performance in any environment, including improved traction on wet and muddy terrain. The forefoot rubber is formulated for increased grip while the heel area is formulated for abrasion resistance and increased durability. The outsole also wraps up at the toes for understated protection against aggressive terrain or when doing push-ups. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance during any activity including rucking or traveling, your feet will swell. This extra space reduces the friction that can occur if your feet rub against the insides of your boot. 3mm Speed Laces Speed laces are 3mm as opposed to standard 5mm. Debris and mud doesn't collect on the 3mm laces like it does on the 5mm, the 3mm rinse off and dry faster, and they're faster to tie because there's less bulk. Rucking Offset The ideal heel-to-toe drop for rucking. A 13mm offset reduces the strain on your achilles (and by proxy your ankle, knees, and hips) and helps to accommodate a natural gait in an unnatural world of asphalt and man-made surfaces. Lightweight EVA Midsole The relationship between the EVA midsole and the rubber outer sole matters greatly to the performance of the boot - and the combined weight is a major factor in whether you want to wear them or not. Premium Suede Molded Heel Counter Wraps a supportive, injection molded plastic heel counter. This combo stabilizes your heel as the suede leather prevents the kind of friction that causes hotspots and blisters. No Spacer Mesh Spacer mesh is soft, squishy, and feels comfortable to your hand when you touch it. But it’s a trap, literally. The first time spacer mesh looks at any kind of water, your boots get heavier and they stay that way. So we proudly do not use spacer mesh, end of story. Custom Compression Insert Our custom insert uses a dense compression foam system that supports your entire foot from heel to toe - including contoured arch support - throughout the duration of your foot strike. Molded Toe Cap The addition of the molded toe cap ensures that the boot keeps it’s shape. No Break-In Time They're ready when you are, right out of the box. Rear Finger Loop Added a finger loop to the rear of the boot so you can easily pull your Travelers on and off. Specs + Materials Upper Materials: full-grain Challenge Leather™ Interior Material: 500D CORDURA and premium suede garment leather Lightweight EVA midsole Workhorse insert included High-traction rubber outsole 13mm heel-to-toe drop Neutral last (straight from heel to toe) 6" shaft height 6" dimensions (size 9): 12"L x 4.25"W x 6.5"H 6" lacing system: 4 eyelets with 2 speed laces / 3mm laces Built in Vietnam

GORUCK X CARRYOLOGY BERSERKER VIKING BULLET RUCK Two and a half years of development, prototyping, sourcing, testing, and refining. The third installment of the GRXC program. Inspired by the menacing axe-wielding Norsemen warriors of an age long forgotten. Each GRXC program draws inspiration from a warrior, and the Berserker might be the most fearsome in history. We've all seen the iconic image: a small, round, horned helmet supposedly worn by Vikings. Despite its prevalence in lore and Hollywood, there's no historical evidence that Vikings ever wore such helmets. In fact, only six metal Viking helmets have ever been found, none with horns. This myth is a prime example of how misinformation about the Norsemen has spread through time. When it comes to Viking armor, another mystery persists. Only one chainmail tunic has been found in Scandinavia, and its Viking origin is highly disputed. Most researchers believe that Vikings crafted their armor from heavy cloth and thick leather, rather than metal And so, like Viking armor, the entire exterior of this collection would be made from leather—not lightweight, flimsy fashion leather, but something more substantial. We tested dozens of leather samples and chose a thick 1.6mm cowhide leather for its toughness and the way it fills out the bag’s shape. This leather is rugged yet smooth to the touch. It’s built to withstand wear and tear, shaping to your body like armor over time. The Bullet is the perfect streamlined ruck that you can use as a daypack or a grab and go ruck. NOTE: Limit 2 per customer. No order cancellations - all orders can be returned within 30 days of delivery if in new condition. No additional discounts apply, including GovX. Features Black cowhide leather exterior Revised bombproof laptop compartment featuring the zipper on the side for side access Slick exterior front 15L interior capacity MOLLE/PADS on shoulder straps Riri AquaGuard YKK zippers with Dyneema zipper pullers from the Neatherlands Custom blue Vegvísir printed 500D CORDURA liner Small hidden zipper pocket underneath the handle Leather GRXC3 Viking patch Opens Flat: Easy to pack and organize. Special Forces medical rucks share a similar design. Extra Padded Straps: Shoulder straps and top handle are extra padded to carry heavier loads more comfortably. Streamlined Design with only single compartment and 3 interior pockets, including one for your Ruck Plate. All 10LB, 20LB, and 30LB Ruck Plates will fit in the plate pocket. Padded Back Panel for additional comfort next to your back when on the move. Specs + Materials Primary Material: 1.6~1.8mm Cowhide Leather Internal Material: 500D CORDURA Back Panel & Shoulder Strap Underside Material: 210D CORDURA Dimensions: 10.75"W x 18.5"H x 5.5"D External Slant Pocket: 10.5"W x 11.5"H Internal Mesh Pocket: 10.5"W x 11"H Internal Cordura Pocket: 10"W x 6.75"H Internal Large Slip Pocket: 10.5"W x 11.75"H Laptop Protection: Fits most 14” laptops

GORUCK X CARRYOLOGY BERSERKER VIKING KIT BAG Two and a half years of development, prototyping, sourcing, testing, and refining. The third installment of the GRXC program. Inspired by the menacing axe-wielding Norsemen warriors of an age long forgotten. Each GRXC program draws inspiration from a warrior, and the Berserker might be the most fearsome in history. We've all seen the iconic image: a small, round, horned helmet supposedly worn by Vikings. Despite its prevalence in lore and Hollywood, there's no historical evidence that Vikings ever wore such helmets. In fact, only six metal Viking helmets have ever been found, none with horns. This myth is a prime example of how misinformation about the Norsemen has spread through time. When it comes to Viking armor, another mystery persists. Only one chainmail tunic has been found in Scandinavia, and its Viking origin is highly disputed. Most researchers believe that Vikings crafted their armor from heavy cloth and thick leather, rather than metal. And so like Viking armor, the entire exterior of this collection would be made from leather—not lightweight, flimsy fashion leather, but something more substantial. We tested dozens of leather samples and chose a thick 1.6mm cowhide leather for its toughness and the way it fills out the bag’s shape. This leather is rugged yet smooth to the touch. It’s built to withstand wear and tear, shaping to your body like armor over time. Our Kit Bags are inspired by classic aviator's kit bags, which are also used by Special Forces teams to transport a small army’s worth of gear (per person). We've modernized the aviator's kit bag and added functionality not for jumping out of airplanes, but for daily use, travel, and storage, ideal for users who prefer to hand/shoulder carry or check-in their second bag. NOTE: Limit 2 per customer. No order cancellations - all orders can be returned within 30 days of delivery if in new condition. No additional discounts apply, including GovX. Features Black cowhide leather exterior Custom blue Vegvísir printed 500D CORDURA liner Padded leather shoulder strap with metal hardware GORUCK x Carryology GRXC3 collab label Leather GRXC3 Viking patch Main zippers are black Riri AQUAzip with an all-metal zipper puller from Switzerland Additional zippers are YKK Aquaguard and reverse coil The inside logo accessory pocket zipper puller is made of Norwegian Reindeer leather.  All other zipper pullers are dyneema Three (3) interior zipper pockets Re-designed internal pocket with enough space to fit any phone TSA Carry-on compliant Includes Adjustable Padded Shoulder Strap Opens wide for easy access when packing and traveling Specs & Materials Primary material: 1.6~1.8mm Cowhide Leather Internal liner material: 500D CORDURA 32L Dimensions: 17.5”W x 11.5"H x 9”D

BEST-IN-CLASS WOOL SOCKS BUILT FOR TIME AND DISTANCE We put our feet through hell, so our socks must meet the highest standards—no blisters, no friction where the sock meets the shoe. The Merino Wool Challenge Sock - Crew was built to tackle anything from rucking miles across the rainforest to sandbag workouts in your driveway, these socks won’t wear thin or lose shape. They’ll keep your feet dry and, even after days of use, they don’t stink. Ultimately, they work well with any shoe but were designed to counter friction from the heel cup over time and distance when wearing boots. They’re unconditionally backed by our Scars Lifetime Guarantee and proudly made in the USA. Socks are final sale and not eligible for returns or exchanges. Primary Features Boot Height Higher percentage of merino wool in the body Higher percentage of nylon in high-wear areas Deep heel pocket Contoured to your calf shape Robust cushion at high impact areas Extended arch support Reinforced toe Smooth toe seam Mesh vents Proudly built in the USA Unconditional Scars Lifetime Guarantee: If you somehow manage to wear them out, we’ll send you a new pair. Fabric & Care MATERIALS: 54% MERINO WOOL: breathable to keep your feet cool and dry, antimicrobial to fight stink 42% NYLON: adds toughness and reduces friction to prevent blisters 4% SPANDEX: just enough stretch to maintain shape and fit over all the miles and all the days CARE INSTRUCTIONS: Machine wash cold, do not bleach, hang dry

RUCK. RUN. LIFT. TRAIN. BE STRONGER WITH ROUGH RUNNER® We built the Rough Runner® to be lightweight and good for high mileage, on a modern running platform. You’ll recognize this in a comfortable fit, but these are not just normal running shoes. In Special Forces, we would run our asses off on pavement and on tank trails and then get to the physical training — push, pull, carry, drag and roll around in dirt fields with weight and slick. Simply running in a straight line is not enough for our way of life and we needed more versatility to do all the things. This is the inspiration for the Rough Runner®. Features GRADIENT DENSITY™ EVA MIDSOLE There's no other midsole like it. Custom formulated EVA provides cushioning and rebound with better long-term durability than any other running shoe on the market. No marshmallow here. Gradient Density™ means the EVA has more bounce under the balls of your foot and gradually becomes more stable towards your heel. You can't see it, but you'll feel the difference from heel strike to toe off. VERSATILE ROAD-TO-TRAIL OUTSOLE Pound the pavement or go off-road. Two different rubber compounds form a single, seamless rubber outsole that performs in even the most demanding terrain. The forefoot rubber is formulated for increased grip and the heel is dense, durable and won't wear down after miles of running or ruck running. LIGHTWEIGHT MESH + REINFORCED TPU UPPER Seamless, one-piece 100D polyester mesh provides breathability and flexibility without cramping your toes. At 330 g/sqm it's the ideal balance of weight and toughness. High-wear areas are reinforced with a protective TPU film. We targeted the toe area for abrasion resistance and the midfoot to heel area for additional lockdown support. 10MM OFFSET A 10mm heel-to-toe drop allows for the ideal balance between a running stride and a rucking gait. You have enough of a lift to reduce the strain on your achilles and support your heel strike while still controlling your cadence. 3D MOLDED HEEL LOCK Comfortable PU foam bolsters lock in the heel to prevent slippage and excessive movement around the ankle. This allows you to secure your heel into the shoe without relying on lace-locking or lacing too tightly. ANATOMICALLY MOLDED TPU HEEL COUNTER Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. REFLECTIVE PULL TAB Highly reflective pull tab on the back heel keeps you visible on the road or trail. Stay safe out there when choosing the harder path. LACE-LOCK EYELETS Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. CUSTOM HIGH DENSITY INSERT Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Specs + Materials Upper materials: 100D polyester mesh + TPU film reinforcement Gradient Density™ EVA Midsole Dual Compound Rubber Outsole Custom High Density Insert included 10mm heel-to-toe drop Weight (size 9): 10.5 ounces Dimensions (size 9): 12"x4.5"x4.5" Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

RUCK. RUN. LIFT. TRAIN. BE STRONGER WITH ROUGH RUNNER® We built the Rough Runner® to be lightweight and good for high mileage, on a modern running platform. You’ll recognize this in a comfortable fit, but these are not just normal running shoes. In Special Forces, we would run our asses off on pavement and on tank trails and then get to the physical training — push, pull, carry, drag and roll around in dirt fields with weight and slick. Simply running in a straight line is not enough for our way of life and we needed more versatility to do all the things. This is the inspiration for the Rough Runner®. Features GRADIENT DENSITY™ EVA MIDSOLE There's no other midsole like it. Custom formulated EVA provides cushioning and rebound with better long-term durability than any other running shoe on the market. No marshmallow here. Gradient Density™ means the EVA has more bounce under the balls of your foot and gradually becomes more stable towards your heel. You can't see it, but you'll feel the difference from heel strike to toe off. VERSATILE ROAD-TO-TRAIL OUTSOLE Pound the pavement or go off-road. Two different rubber compounds form a single, seamless rubber outsole that performs in even the most demanding terrain. The forefoot rubber is formulated for increased grip and the heel is dense, durable and won't wear down after miles of running or ruck running. LIGHTWEIGHT MESH + REINFORCED TPU UPPER Seamless, one-piece 100D polyester mesh provides breathability and flexibility without cramping your toes. At 330 g/sqm it's the ideal balance of weight and toughness. High-wear areas are reinforced with a protective TPU film. We targeted the toe area for abrasion resistance and the midfoot to heel area for additional lockdown support. 10MM OFFSET A 10mm heel-to-toe drop allows for the ideal balance between a running stride and a rucking gait. You have enough of a lift to reduce the strain on your achilles and support your heel strike while still controlling your cadence. 3D MOLDED HEEL LOCK Comfortable PU foam bolsters lock in the heel to prevent slippage and excessive movement around the ankle. This allows you to secure your heel into the shoe without relying on lace-locking or lacing too tightly. ANATOMICALLY MOLDED TPU HEEL COUNTER Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. REFLECTIVE PULL TAB Highly reflective pull tab on the back heel keeps you visible on the road or trail. Stay safe out there when choosing the harder path. LACE-LOCK EYELETS Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. CUSTOM HIGH DENSITY INSERT Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Specs + Materials Upper materials: 100D polyester mesh + TPU film reinforcement Gradient Density™ EVA Midsole Dual Compound Rubber Outsole Custom High Density Insert included 10mm heel-to-toe drop Weight (size 9): 10.5 ounces Dimensions (size 9): 12"x4.5"x4.5" Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

LARGEST POSSIBLE CARRY-ON RUCKSACK Traveling hands-free is freedom and nobody brings a roll bag on an adventure. Never check a bag and never drag anything behind you ever again with GR3®. The 45L GR3® is the largest possible carry-on rucksack, sized to fit in the overhead bin of all major airlines. The 35L GR3® maximizes packing space in a compact form factor, sized to fit in all overhead bins. It’s big, tough, and overbuilt with the best materials on the market. Proudly backed by our Scars Lifetime Guarantee. NOTE: GR3 does not include Padded Hip Belt Features Tough to Break, Hard to Rip: Robic nylon is up to 50% stronger with up to 2.5x the tear strength compared to standard nylon 6 fabrics. Opens flat making it easier to pack YKK zippers with silent, glove friendly zipper pulls constructed from parachute 550 cord Small hidden zipper pocket underneath the handle Separate Bombproof Laptop Compartment next to your back is extra reinforced to securely take a laptop into combat and fits a 17"+ laptop Featuring 4 rows of external MOLLE (45L only) Padded top handle and 2 padded side handles, perfect for carrying through the airport, pulling out of the overhead bin, or camping and hiking Extra Padded Straps to carry heavier loads more comfortably 2 large mesh zippered interior pockets and 1 small go-to zippered pocket plus external slant pocket for quick access to small items. 2 Compression Straps on each side allows you to pack the bag full then cinch the straps down TSA Carry-On Compliant Scars Lifetime Guarantee: The best on the market. Specs + Materials Dimensions: (35L) 20”H x 12.8”W x 7.5” D (45L) 22"H x 14"W x 9"D Weight: (35L) 3.4lbs (45L) 3.6lbs Primary Material: Built out of 420D ROBIC® Ripstop Nylon Back Panel: 210D CORDURA® Underneath Shoulder Straps: 210D CORDURA® Laptop Compartment 35L: 18.5” H x 12.5” W Laptop Compartment 45L: 19.5"H x 13.5"W External Slant Pocket 35L: 12.5” W x 15” H External Slant Pocket 45L: 13"W x 15.5"H Internal Mesh Pocket 1 35L: 12.5” W x 6” H Internal Mesh Pocket 1 45L: 13.5"W x 6"H Internal Mesh Pocket 2 35L: 13” W x 6.5” H Internal Mesh Pocket 2 45L: 13"W x 5.5"H Internal Cordura Pocket 35L: 12.5” W x 5” H Internal Cordura Pocket 45L: 13"W x 5"H Quick Access Pocket (35L): 9” L x 5.75” W x 6” D

Think back to elementary school, where Field Day was every kid’s favorite spring event. You got to go outside with friends and compete in various track and field events for ribbons or trophies. We designed this month’s Callout to be similar, but with a heaping helping of our kind of Good Livin’. Divide your participants into two teams who will compete in several events of your choosing (a handy list of options is supplied below). And you can either designate a prize for the winning team, or let the winners pick the penalty PT for the losers. But regardless, have fun and celebrate with everyone at the end! THE DETAILS:  Minimum 4 people but this works better with 10 or more Zero mileage requirement, but feel free to add a distance component if you want Pick a few event from options below: Centipede Pushups Each team creates a single line in the pushup position (rucks on), with the first person’s feet on the shoulders of the second person. The second person’s feet will be on the shoulders of the third person, and so on. The only feet on the ground will be the last person in line. Then both teams will perform as many pushups as possible. Sandbag Races This is a relay race where each team has a sandbag (you choose the weight), and both teams are lined up behind it. Pick a distance, and then each team sends one person with the sandbag out and back, tagging the next person to do the same. You can choose how the sandbag should be carried (Zercher carry, farmer carry, bear hug carry, back rack carry, overhead carry, etc). First team to send all members out and back is the winner. Bear Crawl Races Just like the Sandbag Race, but each team will be bear crawling out and back as fast as possible with rucks on. Remember, bears don’t have knees!  Elephant Races Both teams line up in a single line, each participant bends over and extends their right hand forward and their left hand through their legs. The person behind reaches forward and holds the hand of the person in front of them, so that each team is joined by hands and must walk slowly like a plodding elephant. Both teams should be sent to a waypoint and back, the first team to return wins. Multi-Legged Race This one is a team-based version of the 3-legged race. Line up the entire team and strap the left leg of one GRT to the right leg of another GRT. Then have the entire team move forward as one big line (this will be very challenging). Either pick a certain distance to cross, or a time hack to reach a certain distance. Pass the Worm Connect several sandbags together with carabiners. Stand your teammates in a line and pass the connected sandbags from one end to the other. If your team is small, the person who started the passing runs down to the end and continues the passing, then the next person moves down so that the line of people keeps shifting and the connected sandbags keep moving. THE WORM CAN NEVER TOUCH THE GROUND. Continue this to a designated endpoint and the team that reaches it first is the winner. Ruck Up Relay Participants put their rucks into a single line and then split into two teams on opposite sides. Both teams send one person at a time to the center to pick up their ruck, put it on and run back to the line. As soon as the runner returns, the second teammate runs in to get their ruck, and so on. The winning team is the first to have all members with their rucks on. GET CREATIVE! This list is by no means exhaustive, you’re free to add any kind of physical competition that works best for your club members. No weight requirement, use your regular training weight Share on social media and use #RUCKCLUBCALLOUT and tag @goruck

3X Support™ = 3X Stability Lift heavier. Sprint faster. Ruck harder. And look cool doing it. The new standard in functional fitness footwear with 3X Support™ and 3X Stability for all three (3) of your arches, making them the best workout shoes for men and women ever created. Features Engineered Warp Knit & CORDURA® Ballistic Nylon Upper The forefoot is constructed using an engineered warp knit technology which provides a seamless one piece vamp and toe cap while offering areas of reinforced strength and other areas of breathability and flexibility. The lace area, midfoot and heel is made from two panels of CORDURA® Ballistic Nylon — offering the toughest Special Forces grade abrasion resistance against the stresses of rope climbs. This CORDURA® also provides superior midfoot and heel support during dynamic movements. Anatomically Molded TPU Heel Counter Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. Lace-Lock Eyelets Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. Wide Toe Box Generous forefoot area lets your toes breathe. Over time and distance doing the work at the gym or anywhere you're training, your feet will swell. This extra space, along with the breathable and flexible knit, reduces the friction that can occur if your feet rub against the insides of your shoe. Custom High Density Insert Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Versatile Heel-to-Toe Drop Classic powerlifting shoes have a 20mm+ heel-to-toe drop (and meant for nothing else), running shoes are all over the place (according to the latest fad), other functional fitness trainers and some weight training shoes are 4mm (and you can't wait to take them off after the WOD), Chuck T's are zero drop (and painful over all the miles). The 8mm heel-to-toe drop in the Ballistic Trainers™ creates the best biomechanical advantage when lifting heavy loads (squat, clean, snatch) or moving more than 400 meters (running or rucking). Gradient Density™ EVA Midsole Two (2) different types of EVA fused together in a smooth gradient from forefoot to heel. High rebound, high flexibility EVA in the forefoot provides cushion and support for explosive movement. Firm, stable EVA in the heel provides a stable platform to keep you grounded when lifting or squatting. Triple Compound Rubber Outsole Three (3) different rubber compounds form a single, seamless rubber outsole. Forefoot rubber is formulated for increased grip while the heel area is dense and won't wear down after miles of running or rucking. The midfoot is formulated from a rock climbing compound and hardened for exceptional abrasion resistance — ideal for rope climbs. Specs + Materials Upper materials: Engineered Knit, CORDURA® Gradient Density™ EVA Midsole Triple Compound Rubber Outsole Custom High Density Insert included 8mm heel-to-toe drop Weight (size W11): 0.675 lbs (10.8 ounces) Dimensions (size W11): 12"L x 4.25"W x 4.5”H Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

RUCK. RUN. LIFT. TRAIN. BE STRONGER WITH ROUGH RUNNER® We built the Rough Runner® to be lightweight and good for high mileage, on a modern running platform. You’ll recognize this in a comfortable fit, but these are not just normal running shoes. In Special Forces, we would run our asses off on pavement and on tank trails and then get to the physical training — push, pull, carry, drag and roll around in dirt fields with weight and slick. Simply running in a straight line is not enough for our way of life and we needed more versatility to do all the things. This is the inspiration for the Rough Runner®. Features GRADIENT DENSITY™ EVA MIDSOLE There's no other midsole like it. Custom formulated EVA provides cushioning and rebound with better long-term durability than any other running shoe on the market. No marshmallow here. Gradient Density™ means the EVA has more bounce under the balls of your foot and gradually becomes more stable towards your heel. You can't see it, but you'll feel the difference from heel strike to toe off. VERSATILE ROAD-TO-TRAIL OUTSOLE Pound the pavement or go off-road. Two different rubber compounds form a single, seamless rubber outsole that performs in even the most demanding terrain. The forefoot rubber is formulated for increased grip and the heel is dense, durable and won't wear down after miles of running or ruck running. LIGHTWEIGHT MESH + REINFORCED TPU UPPER Seamless, one-piece 100D polyester mesh provides breathability and flexibility without cramping your toes. At 330 g/sqm it's the ideal balance of weight and toughness. High-wear areas are reinforced with a protective TPU film. We targeted the toe area for abrasion resistance and the midfoot to heel area for additional lockdown support. 10MM OFFSET A 10mm heel-to-toe drop allows for the ideal balance between a running stride and a rucking gait. You have enough of a lift to reduce the strain on your achilles and support your heel strike while still controlling your cadence. 3D MOLDED HEEL LOCK Comfortable PU foam bolsters lock in the heel to prevent slippage and excessive movement around the ankle. This allows you to secure your heel into the shoe without relying on lace-locking or lacing too tightly. ANATOMICALLY MOLDED TPU HEEL COUNTER Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. REFLECTIVE PULL TAB Highly reflective pull tab on the back heel keeps you visible on the road or trail. Stay safe out there when choosing the harder path. LACE-LOCK EYELETS Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. CUSTOM HIGH DENSITY INSERT Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Specs + Materials Upper materials: 100D polyester mesh + TPU film reinforcement Gradient Density™ EVA Midsole Dual Compound Rubber Outsole Custom High Density Insert included 10mm heel-to-toe drop Weight (size 9): 10.5 ounces Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

RUCK. RUN. LIFT. TRAIN. BE STRONGER WITH ROUGH RUNNER® We built the Rough Runner® to be lightweight and good for high mileage, on a modern running platform. You’ll recognize this in a comfortable fit, but these are not just normal running shoes. In Special Forces, we would run our asses off on pavement and on tank trails and then get to the physical training — push, pull, carry, drag and roll around in dirt fields with weight and slick. Simply running in a straight line is not enough for our way of life and we needed more versatility to do all the things. This is the inspiration for the Rough Runner®. Features GRADIENT DENSITY™ EVA MIDSOLE There's no other midsole like it. Custom formulated EVA provides cushioning and rebound with better long-term durability than any other running shoe on the market. No marshmallow here. Gradient Density™ means the EVA has more bounce under the balls of your foot and gradually becomes more stable towards your heel. You can't see it, but you'll feel the difference from heel strike to toe off. VERSATILE ROAD-TO-TRAIL OUTSOLE Pound the pavement or go off-road. Two different rubber compounds form a single, seamless rubber outsole that performs in even the most demanding terrain. The forefoot rubber is formulated for increased grip and the heel is dense, durable and won't wear down after miles of running or ruck running. LIGHTWEIGHT MESH + REINFORCED TPU UPPER Seamless, one-piece 100D polyester mesh provides breathability and flexibility without cramping your toes. At 330 g/sqm it's the ideal balance of weight and toughness. High-wear areas are reinforced with a protective TPU film. We targeted the toe area for abrasion resistance and the midfoot to heel area for additional lockdown support. 10MM OFFSET A 10mm heel-to-toe drop allows for the ideal balance between a running stride and a rucking gait. You have enough of a lift to reduce the strain on your achilles and support your heel strike while still controlling your cadence. 3D MOLDED HEEL LOCK Comfortable PU foam bolsters lock in the heel to prevent slippage and excessive movement around the ankle. This allows you to secure your heel into the shoe without relying on lace-locking or lacing too tightly. ANATOMICALLY MOLDED TPU HEEL COUNTER Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. REFLECTIVE PULL TAB Highly reflective pull tab on the back heel keeps you visible on the road or trail. Stay safe out there when choosing the harder path. LACE-LOCK EYELETS Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. CUSTOM HIGH DENSITY INSERT Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Specs + Materials Upper materials: 100D polyester mesh + TPU film reinforcement Gradient Density™ EVA Midsole Dual Compound Rubber Outsole Custom High Density Insert included 10mm heel-to-toe drop Weight (size 9): 10.5 ounces Dimensions (size 9): 12"x4.5"x4.5" Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.

RUCK. RUN. LIFT. TRAIN. BE STRONGER WITH ROUGH RUNNER® We built the Rough Runner® to be lightweight and good for high mileage, on a modern running platform. You’ll recognize this in a comfortable fit, but these are not just normal running shoes. In Special Forces, we would run our asses off on pavement and on tank trails and then get to the physical training — push, pull, carry, drag and roll around in dirt fields with weight and slick. Simply running in a straight line is not enough for our way of life and we needed more versatility to do all the things. This is the inspiration for the Rough Runner®. Features GRADIENT DENSITY™ EVA MIDSOLE There's no other midsole like it. Custom formulated EVA provides cushioning and rebound with better long-term durability than any other running shoe on the market. No marshmallow here. Gradient Density™ means the EVA has more bounce under the balls of your foot and gradually becomes more stable towards your heel. You can't see it, but you'll feel the difference from heel strike to toe off. VERSATILE ROAD-TO-TRAIL OUTSOLE Pound the pavement or go off-road. Two different rubber compounds form a single, seamless rubber outsole that performs in even the most demanding terrain. The forefoot rubber is formulated for increased grip and the heel is dense, durable and won't wear down after miles of running or ruck running. LIGHTWEIGHT MESH + REINFORCED TPU UPPER Seamless, one-piece 100D polyester mesh provides breathability and flexibility without cramping your toes. At 330 g/sqm it's the ideal balance of weight and toughness. High-wear areas are reinforced with a protective TPU film. We targeted the toe area for abrasion resistance and the midfoot to heel area for additional lockdown support. 10MM OFFSET A 10mm heel-to-toe drop allows for the ideal balance between a running stride and a rucking gait. You have enough of a lift to reduce the strain on your achilles and support your heel strike while still controlling your cadence. 3D MOLDED HEEL LOCK Comfortable PU foam bolsters lock in the heel to prevent slippage and excessive movement around the ankle. This allows you to secure your heel into the shoe without relying on lace-locking or lacing too tightly. ANATOMICALLY MOLDED TPU HEEL COUNTER Anchors your foot with a supportive, injection molded heel counter that stabilizes your heel when you're doing dynamic, load bearing exercises. REFLECTIVE PULL TAB Highly reflective pull tab on the back heel keeps you visible on the road or trail. Stay safe out there when choosing the harder path. LACE-LOCK EYELETS Extra top eyelets can be used to create a tight heel lock — commonly called a runner's loop or lock lace — that prevents heel slippage and excessive movement around the ankle. CUSTOM HIGH DENSITY INSERT Dense, PU foam insert custom made to fit the contours of the foot supporting all three (3) arches of the foot — yes, you have three arches in your foot (the medial longitudinal arch, the lateral longitudinal arch and the anterior transverse arch).  Specs + Materials Upper materials: 100D polyester mesh + TPU film reinforcement Gradient Density™ EVA Midsole Dual Compound Rubber Outsole Custom High Density Insert included 10mm heel-to-toe drop Weight (size 9): 10.5 ounces Dimensions (size 9): 12"x4.5"x4.5" Lace-Lock eyelets Built in Vietnam Care Instructions: Remove insert. Hose them down thoroughly and let air dry (won't take long). Do not use washer/dryer - it's easier this way.